Surrounding audio system
Surrounding audio system
-E-LA8
Line type: Class D
Output power 8 ohms: 4 * 1200W
Output power 4 ohms: 4 * 2000W
Output power 2 ohms: 4 * 2000W
Bridge output power 8 ohms: none
Gain: 32dB
Signal to noise ratio S/N: 110dB
Power supply voltage: 100-240VAC 50-60Hz
Distortion THD:<0.1% (75W 4 ohm load)
Surrounding audio system
-X12
Line type: Class D
Output power 8 ohms: 4 * 1800W
Output power 4 ohms: 4 * 3500W
Output power 2 ohms: 4 * 4000W
Bridge output power 8 ohms: none
Gain: 32dB
Signal to noise ratio S/N: 108dB
Power supply voltage: 100-240VAC 50-60Hz
Distortion THD:<0.1% (75W 4 ohm load)
Surrounding audio system
-EA600/EA800
Output power 8 Ω: 600W
Output power 4 Ω: 1100W
Frequency Response Range: (MUSIC MIC) 20Hz~20KHz
Input Sensitivity: (MIC) 11MV (MUSIC) 210MV
Mid Tone (± 10dB): 100Hz/2.5Hz/10KHz
Microphone Tone (± 10dB): 57Hz/134Hz/400Hz/1KHz/2.5KHz/6.3KHz/10KHz
Music Tone (± 10dB): 57Hz/134Hz/400Hz/1KHz/2.5KHz/6.3KHz/16KHz
Surrounding audio system
-M480/M680
Frequency Range 22-20000Hz
Frequency Response ± 1.5dB ± 1.5dB
SNR>98dB>98dB
Distortion THD+N<0.05%<0.05%
Dynamic Range ADC 105dB, DAC 103dB ADC 105dB, DAC 103dB
Maximum Input Level 180mVrms/-15dBV 3Vrms/8dBV
Maximum Output Level 56Vrms/400W 8 Ω, 69Vrms/600W 8 Ω
Surrounding audio system
-Front stage processor
DSP front-end effector+professional audio processor
Adopting 24Bit data bus and 32Bit DSP
The MUSIC input channel has 7 segments of parameter equalization.
The MIC input channel has 15 segments of parameter equalization.
The main output is equipped with 5 stages of parameter equalization.
The center output, rear output, and subwoofer all have three parameter equalization stages,
The microphone has 3 levels of feedback suppression, effectively eliminating whistling and meeting various environmental needs.
It can store 16 modes for easy access at any time.
The microphone output, main output, center output, subwoofer output, and rear output are all equipped with voltage limit and delay functions.
Surrounding audio system
-P108
Adopting double-sided board+SMT surface mount technology, high current relay, high-precision phosphor copper output universal socket, ensuring ultra-high quality products.
8 power supply timing control with a delay of 1 second for each channel
The overall capacity is 35A, equipped with original Delixi bipolar or single pole 63A air switch.
Machines equipped with bipolar air switches are circular boat type start switches.
The incoming line adopts a national standard 6 square meter RVV flexible cable that meets CCC requirements, and the internal design retains 20% current margin.
A total of 8 socket outputs are provided, with high-precision phosphor copper sheets and universal sockets suitable for various plugs.
Power amplifier series
-D-3000
Output power: 2 * 3000W/8 Ω, 2 * 5000W/4 Ω, 2 * 7100W/2 Ω
Frequency response: 20Hz-20kHz,+0/-1dB
Total harmonic distortion:<0.5%, 20Hz-20kHz
Intermodulation distortion:<0.05%
Conversion rate: 50 V/µ s @ 8 Ω
Damping coefficient:>5000 @ 20-200 Hz
Signal to noise ratio:>110dB
Gain selection: 32dB/35dB/38DB/41dB
Weight and dimensions (W * H * D): 12KG, 482x44x460mm
Power amplifier series
-D-4000
Output power: 2 * 4000W/8 Ω, 2 * 6700W/4 Ω, 2 * 9500W/2 Ω
Frequency response: 20Hz-20kHz,+0/-1dB
Total harmonic distortion:<0.5%, 20Hz-20kHz
Intermodulation distortion:<0.05%
Conversion rate: 50 V/µ s @ 8 Ω
Damping coefficient:>5000 @ 20-200 Hz
Signal to noise ratio:>110dB
Gain selection: 32dB/35dB/38DB/41dB
Weight and dimensions (W * H * D): 12KG, 482x44x460mm
Power amplifier series
-D-4160
Output power: 4 * 1600W/8 Ω, 4 * 2800W/4 Ω, 4 * 3500W/2 Ω
Frequency response: 20Hz-20kHz,+0/-1dB
Total harmonic distortion:<0.5%, 20Hz-20kHz
Intermodulation distortion:<0.05%
Conversion rate: 50 V/µ s @ 8 Ω
Damping coefficient:>5000 @ 20-200 Hz
Signal to noise ratio:>110dB
Gain selection: 32dB/35dB/38DB/41dB
Weight and dimensions (W * H * D): 12KG, 482x44x460mm
Power amplifier series
-D-4200
Output power: 4 * 2000W/8 Ω, 4 * 3500W/4 Ω, 4 * 4400W/2 Ω
Frequency response: 20Hz-20kHz,+0/-1dB
Total harmonic distortion:<0.5%, 20Hz-20kHz
Intermodulation distortion:<0.05%
Conversion rate: 50 V/µ s @ 8 Ω
Damping coefficient:>5000 @ 20-200 Hz
Signal to noise ratio:>110dB
Gain selection: 32dB/35dB/38DB/41dB
Weight and dimensions (W * H * D): 12KG, 482x44x460mm
Power amplifier series
-MC series
Model: MC3/MC4/MC6/MC8/MC10/MC12
Frequency response: 20-20kHz (-0.5dB); Total harmonic distortion:<0.05; Signal to noise ratio:>90dB; Damping coefficient:>400; Resolution:>60dB; Conversion rate:>13v/ μ s; Input sensitivity: 32dB/1v/1.4v; Input impedance: 20k/10k; Voltage gain: 32dB; Output category: Class I; Cooling: Air flow from front to rear; Input: XLR; Output: NL4/Binding post; Function: Power/SIG/clip/BRG/PAR; Front panel indicator: Protect/LCD indicator; Front panel: Power switch/Volume control; Rear panel: Operation mode/input sensitivity/filter; Product size: 483x430x88; Power supply requirements:~220V/50Hz, ± 10%
Power amplifier series
-PA series
Model: PA400/PA600/PA800/PA1000/PA1200
Sensitivity: 0db (0.775Vrms)/1.4V/26db
30KOHM(balanced,stereo)
15KOHM(balanced,parallel)
Frequency response: 20-20KHz (± 0.3db)
Conversion rate: ＞ 10V/us
Damping coefficient: 400:1
Channel separation: ＞ 70db@1KHz
Signal to noise ratio: ＞ 100db
Total harmonic distortion:<0.5% 1KHz
Weight: 13KG Box size: 420 * 97 * 490MM
Power amplifier series
-QDseries
Model: QD2.7/QD2.9/QD2.11/QD2.13/QD2.16/QD2.20/QD2.26
Frequency response 10Hz – 20KHz/± 0.35dB
Total harmonic distortion+noise ≤ 0.5% @ 8 Ω 1kHz
Signal to noise ratio>99dB
Channel isolation (1KHz)>70dB
Conversion rate>30v/ μ s
Damping coefficient>5000 (8Ohm) 20Hz to 100Hz
Voltage gain 39.7dB (0775V: 75V)
Input sensitivity 0.775V, 1V, 1.4V, 2V
Input impedance 10K Ω balance/20K Ω unbalance
Input connection XLR Active balanced
pin1 gnd/pin 2+/pin3-
Power amplifier series
-QD Four Series
Model: MC3/MC4/MC6/MC8/MC10/MC12
Frequency response 10Hz – 20KHz/± 0.35dB
Total harmonic distortion+noise ≤ 0.5% @ 8 Ω 1kHz
Signal to noise ratio>99dB
Channel isolation (1KHz)>70dB
Conversion rate>30v/ μ s
Damping coefficient>3000 (8Ohm) 20Hz to 100Hz
Voltage gain 39.7dB (0775V: 113V)
Input sensitivity 0.775V, 1V, 1.4V, 2V
Input impedance 10K Ω balance/20K Ω unbalance
Power amplifier series
-TD series
Model: PA400/PA600/PA800/PA1000/PA1200
Sensitivity: 0db (0.775Vrms)/1.4V/26db
30KOHM(balanced,stereo)
15KOHM(balanced,parallel)
Frequency response: 20-20KHz (± 0.3db)
Conversion rate: ＞ 10V/us
Damping coefficient: 400:1
Channel separation: ＞ 70db@1KHz
Signal to noise ratio: ＞ 100db
Total harmonic distortion:<0.5% 1KHz
Intermodulation distortion: ≤ 0.35% 8 Ω, 1KHz@1W Power supply: AC 220V 50-60HZ Body size: 482X410X89mm
Power amplifier series
-TD Four Series
Model: QD2.7/QD2.9/QD2.11/QD2.13/QD2.16/QD2.20/QD2.26
Sensitivity: 0db (0.775Vrms)/1.4V/26db
30KOHM(balanced,stereo)
15KOHM(balanced,parallel)
Frequency response: 20-20KHz (± 0.3db)
Conversion rate: ＞ 10V/us
Damping coefficient: 400:1
Channel separation: ＞ 70db@1KHz
Signal to noise ratio: ＞ 100db
Total harmonic distortion:<0.5% 1KHz
Intermodulation distortion: ≤ 0.35% 8 Ω, 1KHz@1W Power supply: AC 220V 50-60HZ Body size: 482X410X89mm
Power amplifier series
-DAP0408G
Audio system delay: 2.8ms
Digital to analog conversion: 24 bit
Sampling rate: 96kHz
Input channel: 4 balanced inputs line level
Audio interface: XLR head male and female
Input impedance: 22k Ω
Maximum input level: 16dBu/Line
Output channel: 8 balanced outputs, line level
Output impedance: 150 Ω
Frequency response curve: 20Hz-40kHz (± 0.5dB)/Line
Bottom noise: 20Hz-20kHz, A-wt, -93dBu
THD+N: -90dB(@0dBu,1kHz,A-wt)/Line
Power amplifier series
-D3060A
▲ 96k24BIT sampling rate
▲ Input 15 segments of PEQ, output 10 segments of PEQ, high and low pass filters
▲ All pass filter AIIpass
▲ Equipped with FIR phase correction function, the input channel comes standard with 4 * 1024 Taps, and the output channel comes standard with 8 * 512 Taps
▲ Standard DEQ dynamic balancing
▲ Support archive encryption function, convenient for factory preset parameters
▲ Support for dynamic balancers
▲ USB driver free automatic connection software, supporting RS232 central control, TCPIP wired and wireless control
▲ Support for Android APP wireless control
▲ Support networking and debugging of multiple machines, remote monitoring